Weidmuller WMF-Series Terminal Blocks

1. All of the Weidmuller WMF-Series Terminal Blocks in this series are 5mm thick. The consistent block thickness provides many options for your cross-connection or jumpering requirements and makes terminal block marking a breeze. This 5mm effective thickness is possible because the fuse holder is located above the body of the terminal block. These fuse blocks accept industry-standard 5x20mm fuses. However, as long as the fuse blocks are separated by one or more non-fuse blocks, they occupy only 5mm of rail space.
2. Pluggable cross-connections or jumpers can span across fused terminal blocks. This means that you can you can feed numerous fused terminal blocks from a single wire to your power supply. Clipping the jumpers with the Weidmuller P/N 900450 WAW 1 tool, provides you with almost unlimited cross-connection possibilities. Insertion of the Weidmuller pluggable jumpers is fast and requires no special tools.
3. All of the Weidmuller WMF-Series Terminal Blocks in the Weidmuller WMF-Series are uniform in cross-section profile. This means that wire insertion is simpler and wiring errors are minimized.

The Weidmuller WMF-Series Terminal Blocks are available in the following configurations:

• Feed-thru
• Disconnect Block with Integral Ground Connection with or without STB test sockets
• Hinged-top, fuse block with or without indication
• And, Hinged-top fuse block with integral ground connection with or without indication.

Additionally, many of these Weidmuller WMF-Series Terminal Blocks are available to accept a plug so that you could interface to these terminals with a custom cable – making for easy connection and removal.

If your wiring configuration calls for fuse block – feed thru – ground or just fuse block – feed thru, the WMF series is the perfect solution!

Contact Specialty Control Systems today for your WMF and all your Weidmuller Weidmuller WMF-Series Terminal Blocks requirements.