Weidmuller DIN-Rail Mountable Receptacles

Weidmuller DIN-Rail Mountable Receptacles

Weidmuller DIN-rail mountable receptacles, offered in 5A, 15A and 20A, provide a convenient power source for portable computers or test devices for in-the-panel troubleshooting. They mount on standard 35mm DIN-rail. The terminations accept slotted or Phillips screwdrivers. The mounting foot includes a latching lock – slide it open, mount the module on the DIN-rail and slide the lock closed.

Weidmuller DIN-Rail Receptacles Key Features:

• Easily snaps onto 35mm DIN-rail
• Panel mountable, model dependent
• 5A, 15A or 20A versions
• Easy to wire
• Available with ground fault current interrupt (GFCI) or standard outlets
• Optional power-on indication with GFCI*
• NEMA rated enclosure with UL94 VO flammability rating
• UL508A, cULus, and cURus and CSA* approved
• Latching mounting foot makes installation and removal from DIN-rail easy
*Applies to part number 6720005430

Weidmuller DRAC DIN-Rail Mountable Receptacles
The DRAC Series Weidmuller DIN-Rail Mountable receptacles are enclosed 15A or 20A power outlets that provide a simple and convenient power source inside a panel. These units are ideal for portable computers or test devices for in-panel troubleshooting.

Weidmuller DIN-Rail Mountable Receptacles Weidmuller – DRAC

Weidmuller Compact Rail Mountable Receptacles
The Compact designed Weidmuller DIN-Rail Mountable receptacle makes adding a 120V maintenance AC outlet to control cabinets quick and easy. It mounts on standard 35mm DIN-rail and requires just 42mm of rail space. An LED indicates that 120V is applied to the module. The terminations accept slotted or Phillips screwdrivers. The mounting foot includes a latching lock – slide it open, mount the module on the DIN-rail and slide the lock closed.

Weidmuller DIN-Rail Mountable Receptacles Weidmuller – Compact

Weidmuller Simplex DIN-Rail Receptacles
The Simplex Weidmuller DIN-Rail Mountable receptacle for use in control cabinets as 120 VAC outlets for power tools, lights, test equipment, computers, etc. Two versions of the Weidmuller Simplex receptacles are available – a single 5 amp outlet with circuit breaker and a single 15 amp outlet without circuit breaker. Both have feed through terminals for the AC power. The 120V enters the modules, powers the outlet, and is available on a separate group of terminals for powering other devices.

Weidmuller DIN-Rail Mountable Receptacles Weidmuller – Simplex

About admin

Jay*2011
This entry was posted in Uncategorized, Weidmuller DIN-Rail Mountable Receptacles and tagged , , , , , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *


*