Weidmuller DIN-rail mountable receptacles, offered in 5A, 15A and 20A, provide a convenient power source for portable computers or test devices for in-the-panel troubleshooting. They mount on standard 35mm DIN-rail. The terminations accept slotted or Phillips screwdrivers. The mounting foot includes a latching lock – slide it open, mount the module on the DIN-rail and slide the lock closed.
Weidmuller DIN-Rail Receptacles Key Features:
• Easily snaps onto 35mm DIN-rail
• Panel mountable, model dependent
• 5A, 15A or 20A versions
• Easy to wire
• Available with ground fault current interrupt (GFCI) or standard outlets
• Optional power-on indication with GFCI*
• NEMA rated enclosure with UL94 VO flammability rating
• UL508A, cULus, and cURus and CSA* approved
• Latching mounting foot makes installation and removal from DIN-rail easy
*Applies to part number 6720005430
Weidmuller DRAC DIN-Rail Mountable Receptacles
The DRAC Series Weidmuller DIN-Rail Mountable receptacles are enclosed 15A or 20A power outlets that provide a simple and convenient power source inside a panel. These units are ideal for portable computers or test devices for in-panel troubleshooting.
Weidmuller – DRAC
Weidmuller Compact Rail Mountable Receptacles
The Compact designed Weidmuller DIN-Rail Mountable receptacle makes adding a 120V maintenance AC outlet to control cabinets quick and easy. It mounts on standard 35mm DIN-rail and requires just 42mm of rail space. An LED indicates that 120V is applied to the module. The terminations accept slotted or Phillips screwdrivers. The mounting foot includes a latching lock – slide it open, mount the module on the DIN-rail and slide the lock closed.
Weidmuller – Compact
Weidmuller Simplex DIN-Rail Receptacles
The Simplex Weidmuller DIN-Rail Mountable receptacle for use in control cabinets as 120 VAC outlets for power tools, lights, test equipment, computers, etc. Two versions of the Weidmuller Simplex receptacles are available – a single 5 amp outlet with circuit breaker and a single 15 amp outlet without circuit breaker. Both have feed through terminals for the AC power. The 120V enters the modules, powers the outlet, and is available on a separate group of terminals for powering other devices.
For this entry “Stripping” means the cutting and removal of the insulation of a wire conductor. After a conductor has been cut to length it is then prepared for the next step or for crimping. For this purpose, a specific length of the conductor insulation has to be removed, while preventing damage to the conductor. The length of the conductor insulation to be removed depends on the terminal clamping point or the crimp to be processed.
To maintain the rated insulation voltage the required wire stripping length is specified for every Weidmuller product. The stripping dimensions must be observed and neither the conductor nor the remaining insulation should be damaged. The lengths (specified in mm e.g. 6 + 0.5mm) must be maintained to be in accordance with rated insulation voltage. This also applies when using wire-end ferrules.
Weidmuller’s professional wire stripping tools guarantee perfect results due to precise adjust-ability of the tool to the corresponding insulation and the conductor cross-section. Precision wire stripping tools by Weidmüller guarantee that the user will always obtain consistent, reliable stripping results.
A big mistake is to use a stripping tool that is not matched to the insulation and cross-section of the conductor. Weidmuller offers hand-operated wire stripping tools that adjust automatically to the corresponding cross-section of the conductor. These tools are designed not to damage the conductor during stripping.
Weidmuller offers wire stripping tools for most wire types and gauges, but for this entry we will spot light The Weidmuller Stripax® wire stripping tool. The Weidmuller Stripax ® wire stripping tool guarantees a consistent stripping result which complies with DIN regulations. The Weidmuller Stripax ® wire stripping tool is rated for standard dimension PVC insulation. Any PVC insulation thicknesses deviating from normal can be set manually. The conductor stopper and integrated wire cutter allow highly versatile use of the tool.
Weidmuller Stripax ® Wire Stripping and Cutting Tool Spec’s
• For flexible and solid conductors with PVC insulation
• Cable with double insulation in two processing steps without special adjustment
• Automatic opening of clamping jaws after stripping
• No play in self-adjusting cutting unit
• Long-lasting blade life
• No splicing of single conductors
• Optimized ergonomic design
• Wire Stripping length adjustable via stop
• Adjustable for different insulation thicknesses
• Switchable partial stripping function
• Removable handle shells
• Fold-out cutting protection
• Custom marking with ESG device markers
Weidmuller Stripax ® part number 9005000000
• Wire Stripping: PVC insulated flexible conductor, size 0.08…10 mm² (~AWG 28…7)
• Cutting: PVC insulated flexible conductor, size 0.08…6 mm² (~AWG 28…10)
• Conductors undamaged due to special self-adjusting stripping blades.
• Processing of multi-conductors, with thin flat ribbon cables and even multiple conductors in one operation
A wire-end ferrule with a plastic collar. The collar provides personnel protection and insures the ferrule is not inserted too far into the terminal block
For use with two wires that must be inserted into a single terminal block
Wire Ferrules – Product Information
Wire ferrules are also called several other names such as wire-end ferrules or cord end terminals. Wire ferrules are used to prevent fraying when using stranded wire. Wire ferrules are cylindrically shaped terminals made of plated copper. They are slipped over the stripped wire and then permanently crimped into place.
Uses for Wire-end Ferrules
When using stranded wire a single strand of the wire (or a “hair” or a “whisker”) occasionally becomes separated from the rest of the wire during the installation process. This loose strand can cause intermittent failure of the electrical system. Intermittent failures are much more difficult and expensive to isolate and repair than other types of failures. For this reason many designers are requiring the use of wire ferrules to eliminate this potential cause of failure. In addition, wire ferrules are ideally suited for applications where the wire may be inserted and removed numerous times.
Wire ferrules are available in three types: 1) uninsulated ferrules (bare); 2) insulated ferrules (a wire ferrule with a plastic collar); or 3) dual-wire ferrules (or twin-wire ferrules). Dual wire ferrules are used to install (or jumper) two wires in a single termination.
Wire-end ferrules are available loose (shipped in bags) or in strips. Ferrule strips are used in automatic crimping tools such as the Weidmuller Stripax Plus. This tool quickly and conveniently cuts the wire, strips the wire, and crimps a ferrule onto the end of the wire.
We are Weidmuller Terminal Block Experts! Let us know how we can help.
INSIDER INFO — Weidmuller WTR Series Disconnect Terminal Blocks
WTR Disconnect Terminal Block Overview
The Weidmuller WTR 2.5 Disconnect Terminal Block is a compact solution for a disconnect (or interrupting-style terminal block that allows the user/operator to safely and conveniently interrupt the current in a feed-thru terminal block. The hinged- top design allows the user to quickly open the circuit and provides visual indication when the circuit has been interrupted. This disconnect terminal block has been on the market for many years. The basic part number for this terminal block (without test sockets) is P/N 1011100000.
WTR "Old Style" Disconnect Terminal Block
Change in Design
Weidmuller introduced the ZQV pluggable jumpers (or cross-connection) for the WDU 2.5 series of terminal blocks to provide fast and reliable jumpering. This system was an instant success. Users wanted the same exceptional functionality for the WTR disconnect blocks.
Weidmuller responded by introducing a new design for the WTR. The new design features a smaller disconnect lever plus a slot for the insertion of the ZQV 2.5 series pluggable jumpers. The basic part number for this terminal block (wihout test sockets) is P/N 1855610000.
Specialty Control Systems Z-Series Terminal Blocks
Here is the latest installment of our Weidmuller Terminal block product information newsletter.
Features of Weidmuller Z-Series Terminal Blocks
The Z-Series terminal block, moulded from Wemid material, is thermally stable up to 120 deg C yet still retains a high degree of flexibility and breakage resistance.The current bars are constructed of tin-plated copper to insure high conductivity and corrosion resistance.
The highlight of the Weidmuller Z-Series Terminal Block product line is a unique, tension-clamp technology that insures a secure, vibration-resistant connection. A stainless-steel spring is used to securely connect the wire to the current bar. A screwdriver is used to open the tension-clamp for the insertion of the wire. When the screwdriver is is removed, a high contact force is supplied by the stainless spring clamp insuring a gas-tight connection to the current bar.
The tension-clamp technology makes termination of the system wiring extremely fast. In addition, the wiring entries are generally on the top of the block in this product line. This means that it is easier to see where the wire is being inserted and helps reduce wiring errors.
The Z-Series terminal block product line includes feed-thru blocks, fuse blocks, disconnect blocks and much more and supports wire sizes from 0.05 sq mm to 35 sq mm.
All of these terminal blocks mount on industry standard TS 35 DIN Mounting Rail. Most of these blocks snap easily onto the rail without requiring any tools.
Tin-Plated Copper Bussbar with Stainless Steel Spring Tension Clamp
Marking
A variety of unique marking options are available for the Z-series terminal block product line including hinged carriers. The most common marking option is the standard DEK marking tags. These tags are available in preprinted cards in standard sequential numbers as well as special print marking tags for your project’s requirements.
Uniform Block Profile for Fuse Block, Feed Thru, Disconnect and Ground Blocks
Ample Space for Marking
Jumpering (or Cross-Connection)
Two jumpering (or cross-connection) options are available for the Weidmuller Z-Series Terminal Block product line:
The feed-thru terminal blocks in this product line will accept up to 3 of the ZQV-type plug–in jumpers to provide significant flexibility for your terminal block’s cross-connection requirements.
The W-Series Terminal Block product line is mature and as a result includes a wide variety of special application blocks, marking systems, and accessories to handle your most demanding application.
Call us TOLL FREE @ 800-255-3121 M-F, 8-5 CSTWe are Weidmuller Terminal Block Experts! Let us know how we can help.
Weidmuller distributor, Specialty Control Systems, has the largest inventory of Weidmuller parts in the nation. We are proud to provide our clients with a large selection and a level of customer service that surpasses our competitors.
Specialty Control Systems, located in League City Texas, distributes parts for Weidmuller to clients across the nation. The fact is that because they have the largest inventory of these parts, in stock, every day, they have become a reliable source by many Weidmuller customers. Specialty Controls Systems has many of the most commonly ordered parts such as:
As a Weidmuller distributor, we have some of the most practical knowledge of Weidmuller parts in our industry. Our experience with the assembly of Weidmuller parts is renowned. Even Weidmuller occasionally calls on the expertise of Specialty Control Systems from time-to-time. Our in-house sales experts have some of the most current revisions of products specs many of which have been revised by our sales team who have evaluated and assembled each part themselves to verify actual specs which are not available online.
This is another reason that so many customers choose Specialty Control Systems as their supplier and Weidmuller distributor. Weidmuller distributors are not all equal. Our claim to fame comes from our unmatched inventory and expertise with Weidmuller parts. As a Weidmuller distributor we understand the specific needs of Weidmuller users. Does your current Weidmuller distributor offer you the level of support that you desire? Give Specialty Control Systems an opportunity to earn your business. You will find that there are very few Weidmuller distributors that operate at the level we do. We are proud Weidmuller distributors and we look forward to serving you.
Contact us today for immediate service!
Contact Us
Please contact us at info@specialtycontrol.com or call us toll free at 800-255-3121 (local Houston 281-332-0999).
You can also complete the form below and we will contact you within 1 business day.
Specialty Control Systems also carries the following items:
The Weidmuller ESX10-T Series circuit protectors have remote reset capabilities that operate through the use of an electronic signal. These circuit protection devices are compact and combine electronic trip characteristics and active current limitation to allow selective disconnection of loads that are connected to 24VDC power supplies (which are widely used in industry today). Selective load protection prevents complete shutdown of the system by quickly disconnecting the faulty path when an overload or short circuit occurs. In other words, selective load protection prevents complete shutdown of the system or output in the event of an overload with the result that one faulty load in the system would otherwise lead to complete disconnection of all loads. This eliminates the need to open an enclosure, dispatch repair personnel and risk their exposure to electrical components.
According to Jay Armstrong of Specialty Control Systems,
“These innovative circuit breakers will find a great deal of use in applications where volatile gasses are present or where these gasses have the proclivity produce explosive hazards.”
Armstrong went on to say that the traditional circuit breakers create an electrical arc that could be disastrous if certain conditions exist.
Typical applications for the Weidmuller ESX10-T include: automation systems (e.g. machine tool, packaging machines) and process control systems (petro/chemical, pharmaceutical, food and beverage, etc.) where selective disconnection is vital and an integral safety technology exists, such as a safety PLC or similar system.
Through selective disconnection feature, the Weidmuller ESX10-T responds much faster to overload or short-circuit conditions than the switch-mode power supply. This is achieved by active current limitation. The Weidmuller ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit breaker. Thus, it is possible to switch on capacitive loads of up to 20,000 μ F, but they are disconnected only in the event of an overload or short circuit. For optimal alignment with the characteristics of the application the current rating of the Weidmuller ESX10-T can be selected in fixed values from 0.5 A to 12 A. Failure and status indication are provided by The Weidmuller ESX10-T Offers a multicolored LED light to indicate failure and working status of the circuit breaker in tandem with an integral, short-circuit-proof status output or relay signal contact. Another useful feature is the ability to access remote operation by use of remote reset signal or remote ON/OFF control signal. If the remote function is not the preferred method the manual ON/OFF button allows for separate actuation and reset of individual load circuits.
Active current limitation for safe connection of capacitive loads up to 20,000 μ F and on overload/short-circuit
Current ratings 0.5A through 12A
Reliable overload disconnection with 1.1 X In plus, even with long load lines or small cable cross sections.
Manual ON/OFF button
Control input IN+ for remote ON/OFF signal (option)
Electronic reset input (option)
Clear status and failure indication though LED, status output SF or Si contact F
Integral fail-safe element adjusted to current rating
Width per unit only 12.5 mm
Rail mounting
Ease of wiring though busbar LINE+ and 0V as well as signal bars and bridges
For more information on the product or applications for use contact one of our qualified Weidmuller product specialists at Specialty Control Systems. Not only does Specialty Control Systems have the largest inventory of Weidmuller parts in the nation, but they have the largest knowledgebase of Weidmuller part applications and can help you save time and money when deciding on the right parts.
Contact Us
Please contact us at info@specialtycontrol.com or call us toll free at 800-255-3121 (local Houston 281-332-0999).
You can also complete the form below and we will contact you within 1 business day.
Weidmuller – DRAC
Weidmuller – Compact 
Weidmuller – Simplex 
