|
Weidmuller specializes in DIN-Rail mounted electrical and electronic solutions. There are many different sizes, materials and styles available in DIN mounting rail and understanding all the options can be confusing.
The most common of these is the relatively short “top-hat” , 35mm style made from steel. This type of rail is available in both slotted and unslotted versions.
The TS 35×7.5 slotted version is P/N 51450 and the unslotted version is P/N 38340.
The most common DIN Rail is mild steel with a corrosion resistant plating. However, SCS offers DIN mounting rail in other materials such as stainless steel, aluminum and even copper!
Here are some sample cross sections of DIN mounting rail.
This is the most common, low-profile 35mm rail.
This common, TS35x7.5 rail is available from SCS in mild steel, stainless steel and aluminum.
The 35mm wide “top-hat” DIN mounting rail is also available in this deeper profile rail which provides additional structural support.
The deep TS35x15 solid rail is P/N 23640
and the deep slotted rail is P/N 23650.
DIN Rail with other cross sections are available.
This is a “G” shaped mounting rail.
The solid version of this TS32 rail is P/N 12280.
The slotted version of TS32 rail is P/N 51440
There are two types of mounting rail that are rather special. This first one is a small, 15mm style “top-hat” mounting rail. This style is used primarily for mounting very small terminal blocks. It is available in slotted mild steel p/n 11750,
solid mild steel P/N 51420, and
solid aluminum p/n 13470.
The second specialty mounting rail is an extra-heavy duty TS53 rail, p/n 49800. This can be used for mounting heavy items.
DIN rail comes in standard lengths of 2 meters, or about 6-1/2 feet. SCS can cut these to your desired length upon request. Rail cutting equipment is also available for high-demand customers.
Contact Specialty Control Systems for all of your DIN Mounting Rail requirements.
|
